服务热线
010-6202 9100
| 品牌 | Alluxa/美国 | 价格区间 | 3千-1万 |
|---|---|---|---|
| 组件类别 | 光学元件 | 应用领域 | 医疗卫生,生物产业,电子,电气,综合 |
Alluxa拉曼滤光片
Alluxa高性能滤光片以的设计工艺和镀膜过程控制,使Alluxa滤光片具有行业内高的透过率,*的截至深度和波长性,其中通过SIRRUS™离子束沉积硬镀膜技术,也使得Alluxa滤光片具有使用寿命长,高损伤阈值,以及*的批次稳定性等特点,并已经广泛应用于生物荧光系统、拉曼系统、量子、雷达通讯等精密光学系统中.
Alluxa除了丰富的标准品,同时提供定制服务,并且定制成本在行业内有相当大的竞争力.
Alluxa拉曼滤光片
1. 带通滤光片：单带通滤光片、多带通滤光片.
图1.各种ULTRA系列带通滤波器，显示从紫外到红外的高透射率。
通过精密波长控制，超陡边缘，深度阻挡和业界*传输水平的组合，Alluxa的ULTRA系列硬涂层薄膜光学带通滤波器将优化各种仪器的性能。
每个ULTRA系列带通滤波器都旨在超越仪器的要求。所有产品都经过严格测试，以确保滤光片性能达到或超过挑战性的规格。
ULTRA系列带通滤光片非常适用于荧光显微镜，流式细胞仪，拉曼光谱，激光雷达和光谱成像等应用。提供单频带，多频带，宽带，超窄带和窄带滤波器。
根据系统的波长范围和要求，ULTRA系列带通滤波器可以定制设计，以满足以下一个或多个具有挑战性的规范：
应用：荧光系统, 流式细胞仪, 拉曼光谱, LIDAR和光谱成像等.
特点：
●透过率可达99%
●Up to 99% transmission for passbands in the visible range
●通过设计达截至深度高达OD10
●Up to OD10 wide range out of band blocking by design
●陡度：0.5% CWL @ 50%T～OD6
●Edge transitions as steep as 0.5% of CWL from 50% T to OD6
●波长范围250nm～13µm可选
●CWL at any wavelength from the UV to the mid IR (～250 nm to 13 µm)
●波长精度误差±0.25%CWL
●Tolerances as tight as ± 0.25% of CWL
●透过波前差(RMS)： 极优0.01λper inch @ 632.8 nm
●TWE as low as 0.01 wave RMS/inch measured at 632.8 nm
用于荧光应用的多频带滤光片
ULTRA系列多频带滤波器，具有陡峭边缘，高传输和OD6带外截至。
ULTRA系列多频带通滤光片可以设计为10个以上的透过波段，波段之间的OD值大于8，超高的截至陡度，高达98％的透过率。 它们非常适合用作荧光技术中的激发或发射滤光片，要求在单个样本中同时检测多个荧光团。
2. 超窄带通滤波器
具有OD6阻断的超窄带滤波器，用于1064 nm Nd：YAG激光器。
凭借业界可达0.1nm的带宽和高达98%的透过率，Alluxa的薄膜超窄带带通滤光片将优化基于激光的系统的性能。
超窄滤光片非常适合用作激光线，激光清除或激光激发滤光片，适用于荧光显微镜，流式细胞仪和DNA测序等应用。它们对激光损伤也很有抵抗力，可确保它们长时间保持高水平的性能。
应用：LIDAR, 拉曼光谱, 及需要净化激光器的精密光学系统.
特点：
●峰值传输率高达98％
●Up to 98% peak transmission
●通过设计达截至深度高达OD10
●Up to OD10 blocking by design
●波长范围250nm～1800nm可选
●CWL at any wavelength from the UV to the near IR (～250nm to 1800nm)
●CWL中心波长精度可达0.05nm
●CWL tolerances as tight as 0.05nm
●FWHM带宽可达0.1nm
●FWHM bandwidths as narrow as0.1nm
●透过波前差(RMS)：极优0.01λper inch @ 632.8nm
●TWE as low as 0.01 wave RMS/inch measured at 632.8nm
3. 陷波滤波器：单带通陷波滤光片, 多带通陷波滤光片
宽范围传输陷波滤波器，用于阻断532 nm倍频Nd：YAG激光器。
Alluxa陷波滤光片ULTRA系列的深度截至，严格的波长控制，极的佳的截至陡度和大范围的传输都可以在不牺牲目标波段质量的情况下阻挡激光器或其他光源。
ULTRA系列陷波滤光片也可以定制截至陡度用于拉曼光谱应用。在某些拉曼应用中，陷波滤光片用来阻断激发激光波长，同时将斯托克斯和反斯托克斯信号传输到检测器。如果缺口边缘不够陡峭，那么接近激光波长的信号就会丢失。
ULTRA系列陷波滤光片都是为了超越的仪器的要求而设计和严格测试的。它们在荧光显微镜、内窥镜检查和DNA测序等应用中非常理想。
根据系统的波长范围和要求，ULTRA系列陷波滤波器可以定制设计，以满足以下一个或多个具有挑战性的规范：
应用：荧光显微镜成像、流式细胞仪、拉曼光谱等.
●截至能力通过设计达到OD8
●Up to OD8 precision blocking by design
●传输率高达99％
●Up to 99% transmission
●波长误差±0.25%
●Tolerances as tight as 0.25% of notch CWL
●波长范围250 nm to 11µm可选
●Notch CWL at any wavelength from the UV to the mid IR (～250 nm to 11 µm)
●透过波前差(RMS)：的优0.01λ per inch @ 632.8 nm
●TWE as low as 0.01 wave RMS/inch measured at 632.8 nm
多陷波滤波器
具有的截至陡度，深度截至和大范围透过率接近100％的多陷波滤波器。
ULTRA系列多陷波滤光片可以设计成在带之间具有比OD8更大的截至深度，的截至陡度和高达98％的透过率。它们非常适用于需要同时阻断多条激光线的应用。
483-40 OD6 ULTRA Bandpass Filter
Alluxa's ULTRA Series of fluorescence filters are designed to provide the highest level of performance currently available for off the shelf products. ULTRA Series filters provide better overall performance than our standard fluorescence filters by using a combination of tight wavelength control (typically ± 1.5 nm), ultra-steep edges, deeper blocking, and the industry's highest transmission levels. They are also specified to produce zero pixel shift when imaging multiple fluorophores. ULTRA Series filters will optimize fluorescence instrument performance, resulting in bright, high contrast images of target molecules. All of Alluxa's filters are durable and hard-coated using a proprietary deposition process.
| Item Number | 7123 |
|---|---|
| Angle of Incidence | 0 Degrees |
| Center Wavelength | 483 nm ± 1.5 nm |
| FWHM | 40 nm Nominal |
| Transmission Band(s) | 465 to 501 nm ＞ 95% T Average |
| Blocking Level | OD6 |
| Blocking Range(s)* | OD6: 300 to 450 nm, 507 to 850 nm; OD4: 850 to 1100 nm |
| Parallelism | ＜ 3.0 Arcseconds |
| Transmitted Wavefront Error | ＜ 0.25 Wave RMS @ 632.8nm |
| Substrate Type | Fused Silica |
| Dimensions | 25.0 mm Diameter |
| Filter Thickness | 2.0 mm |
| Assembly Type | Anodized Aluminum Ring |
| Assembly Thickness | 3.5 mm |
| Main Fluorophore(s) | FITC |
| Alternate Fluorophore(s) | 5-FAM, Alexa Fluor® 488, ATTO 488, ATTO 495, BCECF@pH5.2, BCECF@pH5.5, BCECF@pH9, BODIPY® FL, BODIPY® FL (IgG), BODIPY®-TMSCC, Calcein, Calcium Green™-1, CF™450, CF™488A, CyQUANT®, DCF, DY-490, DY-490XL MegaStokes, EGFP, Fluo-3, Fluo-4, Fluorescein (0.1M NaOH), Fluorescein (IgG), Fluoro-Emerald, FluoSpheres® Yellow-Green, HCS CellMask™ Green, HCS LipidTOX™ Green Phospholipidosis Detection Reagent, HiLyte™ Fluor 488, HmGFP, Kaede Green, LIVE/DEAD® Fixable Green Dead Cell Stain, mHoneydew, MitoTracker® Green FM, NBD, NBD-X, NeuroTrace® 500/525 Green Fluorescent Nissl Stain (RNA), Oregon Green® 488, PA-GFP (post-activation), PicoGreen® dsDNA Quantitation Reagent, PromoFluor-488, PromoFluor-488 Premium, PromoFluor-488LSS, PromoFluor-505, Rhodamine Green™, Rhodol Green, Sodium Green™, Spectrum Green, SYBR® Green I, SYTOX® Green, SYTO® 11, SYTO® 16, SYTO® RNASelect, TagGFP, TagGFP2, TurboGFP, Vybrant® DyeCycle™ Green, ZsGreen1 |
*Auxiliary blocking typical based on the displayed spectrum.
透过率：
OD值：
524-24_673-20 OD6 ULTRA Dual-Bandpass Filter
Alluxa's ULTRA Series of fluorescence filters are designed to provide the highest level of performance currently available for off the shelf products. ULTRA Series filters provide better overall performance than our standard fluorescence filters by using a combination of tight wavelength control (typically ± 1.5 nm), ultra-steep edges, deeper blocking, and the industry's highest transmission levels. They are also specified to produce zero pixel shift when imaging multiple fluorophores. ULTRA Series filters will optimize fluorescence instrument performance, resulting in bright, high contrast images of target molecules. All of Alluxa's filters are durable and hard-coated using a proprietary deposition process.
| Item Number | 7129 |
|---|---|
| Angle of Incidence | 0 Degrees |
| Center Wavelength | 524 nm ± 2.0 nm, 673 nm ± 3.0 nm |
| FWHM | Band 1: 24 nm ± 2.0 nm, Band 2: 20 nm Nominal |
| Transmission Band(s) | 514 to 534 nm ＞93% T Average, 666 to 680 nm ＞93% T Average |
| Blocking Level | OD6 |
| Blocking Range(s)* | OD6: 350 to 498 nm, 541 to 655 nm, 692 to 900 nm |
| Parallelism | ＜ 3.0 Arcseconds |
| Transmitted Wavefront Error | ＜ 0.25 Wave RMS @ 632.8nm |
| Substrate Type | Fused Silica |
| Dimensions | 25.0 mm Diameter |
| Filter Thickness | 1.05 mm |
| Assembly Type | Anodized Aluminum Ring |
| Assembly Thickness | 3.5 mm |
| Main Fluorophore(s) | Cy®5, FITC |
| Alternate Fluorophore(s) | 5-FAM, Alexa Fluor® 488, Alexa Fluor® 647, ATTO 488, ATTO 495, ATTO 635, ATTO 647, ATTO OXA12, BCECF@pH5.2, BCECF@pH5.5, BCECF@pH9, BODIPY® 650/665-X, C5-Thiacyanine, Calcein, CellMask™ Deep Red, CF™450, CF™488A, CF™640R, CF™647, CypHer5 (pH 4.67), CyQUANT®, DiD, DRAQ5™, DY-635, DY-636, DY-647, DY-650, DY-651, DY-656, EGFP, Emerald, EVOblue™-30, Fluo-4, Fluorescein (0.1M NaOH), Fluorescein (IgG), Fluoro-Emerald, FluoSpheres® Dark Red, FluoSpheres® Yellow-Green, HCS CellMask™ Deep Red, HCS CellMask™ Green, HCS NuclearMask™ Deep Red, HiLyte™ Fluor 488, HiLyte™ Fluor 647, HiLyte™ Plus 647, LIVE/DEAD® Fixable Far Red Dead Cell Stain, LIVE/DEAD® Fixable Green Dead Cell Stain, mHoneydew, MitoTracker® Deep Red, MitoTracker® Green FM, NBD, NBD-X, NeuroTrace® 500/525 Green Fluorescent Nissl Stain (RNA), Nile Blue (EtOH), Nile Blue (MeOH), Oregon Green® 488, Oxazine 1, PA-GFP (post-activation), PicoGreen® dsDNA Quantitation Reagent, PromoFluor-488, PromoFluor-488 Premium, PromoFluor-488LSS, PromoFluor-647, Quasar® 670, Rhodamine Green™, Rhodol Green, Spectrum Far Red, Spectrum Green, SYBR® Green I, SYTOX® Green, SYTO® 16, SYTO® 60, SYTO® 62, SYTO® RNASelect, TagGFP, TagGFP2, TurboGFP, Vybrant® DyeCycle™ Ruby, ZsGreen1, NirFP |
透过率：
OD值：
475-27_544-15_632-64 OD6 ULTRA Tri-Bandpass Filter
Alluxa's ULTRA Series of fluorescence filters are designed to provide the highest level of performance currently available for off the shelf products. ULTRA Series filters provide better overall performance than our standard fluorescence filters by using a combination of tight wavelength control (typically ± 1.5 nm), ultra-steep edges, deeper blocking, and the industry's highest transmission levels. They are also specified to produce zero pixel shift when imaging multiple fluorophores. ULTRA Series filters will optimize fluorescence instrument performance, resulting in bright, high contrast images of target molecules. All of Alluxa's filters are durable and hard-coated using a proprietary deposition process.
| Item Number | 7191 |
|---|---|
| Angle of Incidence | 0 Degrees |
| Center Wavelength | 475 nm ± 2.0 nm, 544 nm ± 2.0 nm, 632 nm ± 3.0 nm |
| FWHM | Band 1: 27 nm ± 2.0 nm, Band 2: 15 nm ± 2.0 nm, Band 3: 64 nm Nominal |
| Transmission Band(s) | 465 to 485 nm ＞ 93% T Average 539 to 549 nm ＞ 93% T Average 603 to 661 nm ＞ 93% T Average |
| Blocking Level | OD6 |
| Blocking Range(s)* | OD6: 300 to 452 nm, 496 to 528 nm, 558 to 585 nm, 679 to 800 nm |
| Parallelism | ＜ 3.0 Arcseconds |
| Transmitted Wavefront Error | ＜ 0.25 Wave RMS @ 632.8nm |
| Substrate Type | Fused Silica |
| Dimensions | 25.0 mm Diameter |
| Filter Thickness | 2.0 mm |
| Assembly Type | Anodized Aluminum Ring |
| Assembly Thickness | 3.5 mm |
| Main Fluorophore(s) | mCherry, TurboYFP, CFP |
| Alternate Fluorophore(s) | 5-ROX, 6-JOE, 6-TET, Alexa Fluor® 514, Alexa Fluor® 532, Alexa Fluor® 568, Alexa Fluor® 594, Amplex Gold, AsRed2, ATTO 514, ATTO 520, ATTO 590, ATTO RHO101, ATTO RHO12, ATTO Thio12, BO-PRO-1, BO-PRO-3, BOBO-1, BOBO-3, BODIPY® R6G, BODIPY® TR-X, BODIPY® TR-X (Phallacidin), BODIPY®-DiMe, C-PC, Calcium Crimson™, Carboxy SNARF®-1 (pH 9), CellTrace™ BODIPY® TR, CellTracker™ Red CMTPX, CF™450, CF™514, CF™517ST, CF™583, CF™594, CF™594ST, Crystal Violet (glycerol), DHPE Texas Red®, DY-500, DY-500XL MegaStokes, DY-590, Eosin, Eosin Y, Erythrosin-5-isothiocyanate, EYFP, FlAsh, FluoSpheres® Red, FusionRed, HCS LipidTOX™ Green Phospholipidosis Detection Reagent, HCS LipidTOX™ Red Neutral Lipid Stain, HCS LipidTOX™ Red Phospholipidosis Detection Reagent, JOJO-1, Katushka2S, KFP-Red, LIVE/DEAD® Fixable Red Dead Cell Stain, mApple, mHoneydew, MitoTracker® Red, mKate2, mPlum, mRFP1, mStrawberry, Nile Red, Oregon Green® 514, PA-TagRFP, PromoFluor-505, PromoFluor-590, PromoFluor-594, ReAsH, Rhodamine 6G, TagFP635, TagYFP, Texas Red® (Dextran), Texas Red® R-PE, Texas Red®-X, TO-PRO®-1, TOTO®-1, TurboFP602, TurboFP650, Vybrant® DyeCycle™ Green, Carboxynapthofluorescein, ECFP, TagCFP, SYTO® 43, ATTO 425, Auramine O, Coumarin 314, Coumarin 343, ECL Plus, PO-PRO™-1, POPO™-1, PromoFluor-415, Spectrum Aqua, SYTO® 42, SYTO® 44, SYTO® 45 |
透过率：
OD值：
1064.1-1 OD7 Ultra Narrow Bandpass
Ultra Narrow filters bring new levels of performance to filters with very narrow bandwidth responses. Typically fully blocked to OD4 or OD6 and ＜ 3 nm wide at FWHM, Alluxa Ultra Narrow Filters are uniquely steep and accurate. All Alluxa Ultra Narrow filters are fabricated with a proprietary durable, hard coating process. Even very narrow ( ＜ 0.5 nm at FWHM ) Ultra Narrow filters typically have transmission values ＞90%.
| Item Number | 7084 |
|---|---|
| Angle of Incidence | 0 Degrees |
| Center Wavelength | 1064.1 nm Nominal |
| FWHM | ＜ 1.2 nm |
| Transmission Band(s)† | 1064.1 nm ＞90% T Absolute |
| Blocking Level | OD7 |
| Blocking Range(s)* | OD7 (By Design): 1092 to 1100 nm, 300 to 1037 nm |
| Filter Design | Multi-Cavity |
| Substrate Type | Borofloat® |
| Dimensions | 25.3 mm Diameter |
| Filter Thickness | 2.0 mm |
| Assembly Type | Anodized Aluminum Ring |
| Assembly Thickness | 5.0 mm |
*Auxiliary blocking typical based on the displayed spectrum.
†For filters with less than 1nm bandwidth, measurement limitations may result in slight transmission variation.
透过率：
OD值：
1064.16-0.4 OD5 Ultra Narrow Bandpass
Ultra Narrow filters bring new levels of performance to filters with very narrow bandwidth responses. Typically fully blocked to OD4 or OD6 and ＜3 nm wide at FWHM, Alluxa Ultra Narrow Filters are uniquely steep and accurate. All Alluxa Ultra Narrow filters are fabricated with a proprietary durable, hard coating process. Even very narrow ( ＜ 0.5 nm at FWHM ) Ultra Narrow filters typically have transmission values ＞90%.
| Item Number | 7055 |
|---|---|
| Angle of Incidence | 0 Degrees |
| Center Wavelength | 1064.16 nm +0.5 / -0.3 nm |
| FWHM | ＜0.6 nm |
| Transmission Band(s)† | Peak＞ 85% T Absolute |
| Blocking Level | OD5 |
| Blocking Range(s)* | OD5: 1094 to 1150 nm, 200 to 1024 nm; OD4: 1150 to 1200 nm |
| Filter Design | Single Cavity |
| Substrate Type | Fused Silica |
| Dimensions | 25.3 mm Diameter |
| Filter Thickness | 2.0 mm |
| Assembly Type | Anodized Aluminum Ring |
| Assembly Thickness | 5.0 mm |
*Auxiliary blocking typical based on the displayed spectrum.
†For filters with less than 1nm bandwidth, measurement limitations may result in slight transmission variation. Please contact us for more information.
透过率：
OD值：
829.375-0.5 OD5 Ultra Narrow Bandpass
Ultra Narrow filters bring new levels of performance to filters with very narrow bandwidth responses. Typically fully blocked to OD4 or OD6 and ＜3 nm wide at FWHM, Alluxa Ultra Narrow Filters are uniquely steep and accurate. All Alluxa Ultra Narrow filters are fabricated with a proprietary durable, hard coating process. Even very narrow ( ＜0.5 nm at FWHM ) Ultra Narrow filters typically have transmission values ＞ 90%.
| Item Number | 7272 |
|---|---|
| Angle of Incidence | 0 Degrees |
| Center Wavelength | 829.375 nm Nominal |
| FWHM | ＜ 0.6 nm |
| Transmission Band(s)† | 829.375 nm ＞80% T Absolute |
| Blocking Level | OD5 |
| Blocking Range(s)* | OD5: 200 to 811 nm, 845 to 1050 nm |
| Filter Design | Multi-Cavity |
| Substrate Type | Polished Borofloat® |
| Dimensions | 25.0 mm Diameter |
| Filter Thickness | 2.0 mm |
| Assembly Type | Anodized Aluminum Ring |
| Assembly Thickness | 3.5 mm |
*Auxiliary blocking typical based on the displayed spectrum.
†For filters with less than 1nm bandwidth, measurement limitations may result in slight transmission variation. Please contact us for more information.
透过率：
OD值：
